Mechanical & Aerospace Engineering Publications

Sunday, July 1, 2018

Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy

Gao, W., Wang, D., Seifi, M., & Lewandowski, J. J. (2018). Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy. Materials Science and Engineering A, 730 (), 367-379.

Sunday, July 1, 2018

Simulation of the Arthropod Central Complex: Moving Towards Bioinspired Robotic Navigation Control

Pickard, S., Quinn, R. D., & Szczecinski, N. (2018). Simulation of the Arthropod Central Complex: Moving Towards Bioinspired Robotic Navigation Control. Springer, (), 370-381.

Sunday, July 1, 2018

Numerical study of gas-phase interactions of phosphorus-containing compounds with co-flow diffusion flames

Takahashi, F., Katta, V., Linteris, G., & Babushok, V. (2018). Numerical study of gas-phase interactions of phosphorus-containing compounds with co-flow diffusion flames. Proceedings of the Combustion Institute, ().

Sunday, July 1, 2018

A Conductance-Based Sensor to Estimate Bladder Volume in Felines

McAdams, I., Majerus, S., Zorman, C., & Damaser, M. (2018). A Conductance-Based Sensor to Estimate Bladder Volume in Felines. Proceedings of the The 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, (), 1592-1595.

Sunday, July 1, 2018

Chemical characterization of Maltese-cross birefringent particles in synovial fluid samples collected from symptomatic joints

Li, B., Singer, N., Rosenthal, A., Unal, M., Haggins, D., Yeni, Y., ... Akkus, O. (2018). Chemical characterization of Maltese-cross birefringent particles in synovial fluid samples collected from symptomatic joints. Joint Bone Spine, 85 (4), 501-503.

Sunday, July 1, 2018

Vascular Graft Pressure-Flow Monitoring Using 3D Printed MWCNT-PDMS Strain Sensors

Majerus, S., Chong, Y., Ariando, D., Swingle, C., Potkay, J., Bogie, K., ... Zorman, C. (2018). Vascular Graft Pressure-Flow Monitoring Using 3D Printed MWCNT-PDMS Strain Sensors. Proceedings of the 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, (), 2989-2992.

Sunday, July 1, 2018

A generalized frictional and hydrodynamic model of the dynamics and structure of dense colloidal suspensions

Boromand, A., Jamali, S., Grove, B., & Maia, J. M. (2018). A generalized frictional and hydrodynamic model of the dynamics and structure of dense colloidal suspensions. Journal of Rheology, 62 (4), 905-918.

Saturday, June 23, 2018

Transient flame growth and spread processes over a large solid fabric in concurrent low-speed flows in microgravity - model versus experiment

Li, C., Liao, Y. T., T'ien, J., Urban, D., Ferkul, P., Olson, S., ... Easton, J. (2018). Transient flame growth and spread processes over a large solid fabric in concurrent low-speed flows in microgravity - model versus experiment. Proceedings of the Combustion Institute, 37 (3), 4163-4171.

Monday, June 18, 2018

Multi-Mode Particle Filter for Bearing Remaining Life Prediction

Wang, P., Yan, R., & Gao, R. X. (2018). Multi-Mode Particle Filter for Bearing Remaining Life Prediction. , ().

Wednesday, June 13, 2018

In vivo biocompatibility and time-dependent changes in mechanical properties of woven collagen meshes: A comparison to xenograft and synthetic mid-urethral sling materials: IN VIVO BIOCOMPATIBILITY AND TIME-DEPENDENT CHANGES IN MECHANICAL PROPERTIES

Chapin, K., Khalifa, A., Mbimba, T., McClellan, P., Anderson, J., Novitsky, Y., ... Akkus, O. (2018). In vivo biocompatibility and time-dependent changes in mechanical properties of woven collagen meshes: A comparison to xenograft and synthetic mid-urethral sling materials: IN VIVO BIOCOMPATIBILITY AND TIME-DEPENDENT CHANGES IN MECHANICAL PROPERTIES. Journal of Biomedical Materials Research - Part B Applied Biomaterials, ().

Wednesday, June 6, 2018

Wind farm cooperative control for optimal power generation

Wang, F., & Garcia-Sanz, M. (2018). Wind farm cooperative control for optimal power generation. Wind Engineering, ().

Monday, June 4, 2018

Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach

Cao, P., Fan, Z., Gao, R. X., & Stangl, J. (2018). Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach. Journal of Manufacturing Science and Engineering, 140 (8).

Friday, June 1, 2018

Potential for thermal damage to the blood-brain barrier during craniotomy: implications for intracortical recording microelectrodes.

Shoffstall, A., Paiz, J., Miller, D., Rial, G., Willis, M., Menendez, D., ... Capadona, J. R. (2018). Potential for thermal damage to the blood-brain barrier during craniotomy: implications for intracortical recording microelectrodes.. Journal of neural engineering, 15 (3), 034001.

Friday, June 1, 2018

Modelling of the transition of a turbulent shock-flame complex to detonation using the linear eddy model

Maxwell, B. M., Pekalski, A., & Radulescu, M. (2018). Modelling of the transition of a turbulent shock-flame complex to detonation using the linear eddy model. Combustion and Flame, 192 (), 340-357.

Friday, June 1, 2018

Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders

Chung, K., Hashiguchi, D., Park, C., Bindas, E., Xiang, J., Willard, M. A., ... Lewandowski, J. J. (2018). Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders. Metal Powder Industries Federation, ().

Friday, June 1, 2018

Long short-term memory for machine remaining life prediction

Zhang, J., Wang, P., Yan, R., & Gao, R. X. (2018). Long short-term memory for machine remaining life prediction. Journal of Manufacturing Systems, ().

Friday, June 1, 2018

Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings

Dahar, M., Tamirisakandala, S., & Lewandowski, J. J. (2018). Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings. International Journal of Fatigue, 111 (), 54-69.

Sunday, May 20, 2018

Effect of flow duct height on concurrent-flow flame spread and the near-limit oscillation

Li, Y., Liao, Y. T., & Ferkul, P. (2018). Effect of flow duct height on concurrent-flow flame spread and the near-limit oscillation. 2018 Spring Technical Meeting of Central States Section of the Combustion Institute, ().

Sunday, May 20, 2018

Experimental and numerical investigation of the ignition and burning characteristics of a group of wooden pieces

Kwon, B., & Liao, Y. T. (2018). Experimental and numerical investigation of the ignition and burning characteristics of a group of wooden pieces. 2018 Spring Technical Meeting of Central States Section of the Combustion Institute, ().

Thursday, May 10, 2018

Experimental and numerical investigation of turbulent jets issuing through a realistic pipeline geometry: Asymmetry effects for air, helium, and hydrogen

Soleimani nia, M., Maxwell, B. M., Oshkai, P., & Djilali, N. (2018). Experimental and numerical investigation of turbulent jets issuing through a realistic pipeline geometry: Asymmetry effects for air, helium, and hydrogen. International Journal of Hydrogen Energy, 43 (19), 9379-9398.

Wednesday, May 2, 2018

Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites

Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J. (2018). Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites. Australian Journal of Mechanical Engineering, (), 9-Jan.

Tuesday, May 1, 2018

Concurrent flame spread over discrete thin fuels

Park, J., Brucker, J., Seballos, R., Kwon, B., & Liao, Y. T. (2018). Concurrent flame spread over discrete thin fuels. Combustion and Flame, 191 (), 116-125.

Tuesday, May 1, 2018

Editorial: The Complexity of Reporting Race and Ethnicity in Orthopaedic Research

Leopold, S., Beadling, L., Calabro, A., Dobbs, M., Gebhardt, M., Gioe, T., ... Wongworawat, M. (2018). Editorial: The Complexity of Reporting Race and Ethnicity in Orthopaedic Research. Clinical Orthopaedics and Related Research, 476 (5), 917-920.

Tuesday, May 1, 2018

What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?

Arnholt, C., MacDonald, D., Klein, G., Cates, H., Rimnac, C. M., Kurtz, S., ... Chen, A. (2018). What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?. Journal of Arthroplasty, ().

Tuesday, May 1, 2018

Three-Dimensional Surgical Needle Localization and Tracking Using Stereo Endoscopic Image Streams

Ozguner, O., Zhao, B., Jackson, R., Shkurti, T., Newman, W. S., & Cavusoglu, M. C. (2018). Three-Dimensional Surgical Needle Localization and Tracking Using Stereo Endoscopic Image Streams. , (), 6617-6624.

Case School of Engineering

Mechanical & Aerospace Engineering

Mechanical & Aerospace Engineering Publications

Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy

Simulation of the Arthropod Central Complex: Moving Towards Bioinspired Robotic Navigation Control

Numerical study of gas-phase interactions of phosphorus-containing compounds with co-flow diffusion flames

A Conductance-Based Sensor to Estimate Bladder Volume in Felines

Chemical characterization of Maltese-cross birefringent particles in synovial fluid samples collected from symptomatic joints

Vascular Graft Pressure-Flow Monitoring Using 3D Printed MWCNT-PDMS Strain Sensors

A generalized frictional and hydrodynamic model of the dynamics and structure of dense colloidal suspensions

Transient flame growth and spread processes over a large solid fabric in concurrent low-speed flows in microgravity - model versus experiment

Multi-Mode Particle Filter for Bearing Remaining Life Prediction

In vivo biocompatibility and time-dependent changes in mechanical properties of woven collagen meshes: A comparison to xenograft and synthetic mid-urethral sling materials: IN VIVO BIOCOMPATIBILITY AND TIME-DEPENDENT CHANGES IN MECHANICAL PROPERTIES

Wind farm cooperative control for optimal power generation

Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach

Potential for thermal damage to the blood-brain barrier during craniotomy: implications for intracortical recording microelectrodes.

Modelling of the transition of a turbulent shock-flame complex to detonation using the linear eddy model

Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders

Long short-term memory for machine remaining life prediction

Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings

Effect of flow duct height on concurrent-flow flame spread and the near-limit oscillation

Experimental and numerical investigation of the ignition and burning characteristics of a group of wooden pieces

Experimental and numerical investigation of turbulent jets issuing through a realistic pipeline geometry: Asymmetry effects for air, helium, and hydrogen

Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites

Concurrent flame spread over discrete thin fuels

Editorial: The Complexity of Reporting Race and Ethnicity in Orthopaedic Research

What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?

Three-Dimensional Surgical Needle Localization and Tracking Using Stereo Endoscopic Image Streams

Pages