Mechanical & Aerospace Engineering Publications

Thursday, January 1, 2015

Walking inverted on ceilings with wheel-legs and micro-structured adhesives

Breckwoldt, W., Daltorio, K., Heepe, L., Horchler, A., Gorb, S., & Quinn, R. D. (2015). Walking inverted on ceilings with wheel-legs and micro-structured adhesives. , (), 3308–3313.

Thursday, January 1, 2015

Effects of subcooling and two-phase inlet on flow boiling heat transfer and critical heat flux in a horizontal channel with one-sided and double-sided heating

Kharangate, C., O'Neill, L., Mudawar, I., Hasan, M., Nahra, H., Balasubramaniam, R., ... Mackey, J. (2015). Effects of subcooling and two-phase inlet on flow boiling heat transfer and critical heat flux in a horizontal channel with one-sided and double-sided heating. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 91 (), 1187-1205.

Thursday, January 1, 2015

Manipulating characteristic timescales and fiber morphology in simultaneous centrifugal spinning and photopolymerization

Fang, Y., Dulaney, A., Gadley, J., Maia, J. M., & Ellison, C. (2015). Manipulating characteristic timescales and fiber morphology in simultaneous centrifugal spinning and photopolymerization. POLYMER, 73 (), 42-51.

Thursday, January 1, 2015

Development and Application of the Notched Tensile Test to UHMWPE

Sobieraj, M., & Rimnac, C. M. (2015). Development and Application of the Notched Tensile Test to UHMWPE. Elsevier Academic Press, (3rd Edition).

Thursday, January 1, 2015

Experimental and computational investigation of vertical downflow condensation

Lee, H., Kharangate, C., Mascarenhas, N., Park, I., & Mudawar, I. (2015). Experimental and computational investigation of vertical downflow condensation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 85 (), 865-879.

Thursday, January 1, 2015

Mitigation of Gear Mesh-Frequency Noise Using a Hydrostatic Bearing

Zulkefli, Z., & Adams, M. L. (2015). Mitigation of Gear Mesh-Frequency Noise Using a Hydrostatic Bearing. , 137 (3), -.

Thursday, January 1, 2015

Peristaltic locomotion of a modular mesh-based worm robot: precision, compliance, and friction

Horchler, A., Kandhari, A., Daltorio, K. A., Moses, K., Ryan, J., Stultz, K., ... Others (2015). Peristaltic locomotion of a modular mesh-based worm robot: precision, compliance, and friction. Soft Robotics, 2 (4), 135--145.

Thursday, January 1, 2015

Microconfinement effect on gas barrier and mechanical properties of multilayer rigid/soft thermoplastic polyurethane films

Huang, R., Chari, P., Tseng, J., Zhang, C., Cox, M., & Maia, J. M. (2015). Microconfinement effect on gas barrier and mechanical properties of multilayer rigid/soft thermoplastic polyurethane films. Journal of Applied Polymer Science, 13 (), 41849.

Thursday, January 1, 2015

Mechanically assisted crevice corrosion damage in shoulder arthroplasty is comparable to hip arthroplasty

Day, J., MacDonald, D., Abboud, J., Williams, G., Rimnac, C. M., Kraay, M., ... Kurtz, S. (2015). Mechanically assisted crevice corrosion damage in shoulder arthroplasty is comparable to hip arthroplasty. ASTM, (STP 1591).

Thursday, January 1, 2015

Flow boiling and critical heat flux in horizontal channel with one-sided and double-sided heating

Kharangate, C., O'Neill, L., Mudawar, I., Hasan, M., Nahra, H., Balasubramaniam, R., ... Mackey, J. (2015). Flow boiling and critical heat flux in horizontal channel with one-sided and double-sided heating. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 90 (), 323-338.

Thursday, January 1, 2015

Mechanical Improvements to TCERA, a Tunable Compliant Energy Return Actuator

Leibach, R., Webster, V., Bachmann, R., & Quinn, R. D. (2015). Mechanical Improvements to TCERA, a Tunable Compliant Energy Return Actuator. Springer International Publishing, (), 410–414.

Thursday, January 1, 2015

Worm-like robotic locomotion with a compliant modular mesh

Horchler, A., Kandhari, A., Daltorio, K. A., Moses, K., Andersen, K., Bunnelle, H., ... Others (2015). Worm-like robotic locomotion with a compliant modular mesh. , (), 26--37.

Thursday, January 1, 2015

Microstructure and rheology of soft to rigid shear-thickening colloidal suspensions

Jamali, S., Boromand, A., Wagner, N., & Maia, J. M. (2015). Microstructure and rheology of soft to rigid shear-thickening colloidal suspensions. Journal of Rheology, 59 (6), 1377-1395.

Thursday, January 1, 2015

A biologically based neural system coordinates the joints and legs of a tetrapod

Hunt, A., Schmidt, M., Fischer, M., & Quinn, R. D. (2015). A biologically based neural system coordinates the joints and legs of a tetrapod. Bioinspiration & biomimetics, 10 (5), 055004.

Thursday, January 1, 2015

Worm-like robotic locomotion with a compliant modular mesh

Horchler, A., Kandhari, A., Daltorio, K., Moses, K., Andersen, K., Bunnelle, H., ... Quinn, R. D. (2015). Worm-like robotic locomotion with a compliant modular mesh. Springer International Publishing, (), 26–37.

Thursday, January 1, 2015

Multilayer coextrusion of rubber compounds

Harris, P., Carson, S., Gadley, J., & Maia, J. M. (2015). Multilayer coextrusion of rubber compounds. POLYMER ENGINEERING AND SCIENCE, 55 (7), 1520-1527.

Thursday, January 1, 2015

Hip Flexion Power Assist System for Use in Hybrid Neuroprostheses

Foglyano, K., Kobetic, R., To, C., Bulea, T., Schnellenberger, J., Audu, M. L., ... Triolo, R. (2015). Hip Flexion Power Assist System for Use in Hybrid Neuroprostheses. Applied Bionics and Biomechanics, 205104 (), 1-8.

Thursday, January 1, 2015

Designing responsive pattern generators: stable heteroclinic channel cycles for modeling and control

Horchler, A., Daltorio, K., Chiel, H., & Quinn, R. D. (2015). Designing responsive pattern generators: stable heteroclinic channel cycles for modeling and control. Bioinspiration & biomimetics, 10 (2), 026001.

Thursday, January 1, 2015

High frequency torsional-mode nanomechanical resonators enabled by very thin nanocrystalline diamond diaphragms

Yang, R., & Zorman, C. (2015). High frequency torsional-mode nanomechanical resonators enabled by very thin nanocrystalline diamond diaphragms. , 54 (), 19-25.

Thursday, January 1, 2015

Optimization of melt blending process of nylon 6-POSS: improving mechanical properties of spun fibers

Andrade, R., Weinrich, Z., Ferreira, C., Schiraldi, D. A., & Maia, J. M. (2015). Optimization of melt blending process of nylon 6-POSS: improving mechanical properties of spun fibers. Polymer Engineering and Science, 55 (), 1580-1588.

Thursday, January 1, 2015

Feasibility of a Hydraulic Power Assist System for Use in Hybrid Neuroprostheses

Foglyano, K., Kobetic, R., To, C., Bulea, T., Schnellenberger, JR, Audu, M., ... Triolo, R. (2015). Feasibility of a Hydraulic Power Assist System for Use in Hybrid Neuroprostheses. APPLIED BIONICS AND BIOMECHANICS, (), 1-8.

Thursday, January 1, 2015

Rheological behavior and structure development in Thermoplastic Polyurethanes under Uniaxial Extensional Flow

Silva, J., Andrade, R., Huang, R., Liu, L., Cox, M., & Maia, J. M. (2015). Rheological behavior and structure development in Thermoplastic Polyurethanes under Uniaxial Extensional Flow. Journal of Non-Newtonian Fluid Mechanics, 222 (), 96-103.

Thursday, January 1, 2015

Goal-Directed CPG-Based Control for Tensegrity Spines with Many Degrees of Freedom Traversing Irregular Terrain

Mirletz, B., Bhandal, P., Adams, R., Agogino, A., Quinn, R. D., & SunSpiral, V. (2015). Goal-Directed CPG-Based Control for Tensegrity Spines with Many Degrees of Freedom Traversing Irregular Terrain. Soft Robotics, 2 (4), 165–176.

Thursday, January 1, 2015

A low-cost robot using omni-directional vision enables insect-like behaviors

Hart, C., Kreinar, E., Chrzanowski, D., Daltorio, K. A., & Quinn, R. D. (2015). A low-cost robot using omni-directional vision enables insect-like behaviors. , (), 5871--5878.

Thursday, January 1, 2015

Biomechanical evaluation of a novel suturing scheme for grafting load-bearing collagen scaffolds for rotator cuff repair

Islam, A., Bohl, M., Tsai, A., Younesi, M., Gillespie, R., & Akkus, O. (2015). Biomechanical evaluation of a novel suturing scheme for grafting load-bearing collagen scaffolds for rotator cuff repair. , 30 (7), 669-675.

Case School of Engineering

Mechanical & Aerospace Engineering

Mechanical & Aerospace Engineering Publications

Walking inverted on ceilings with wheel-legs and micro-structured adhesives

Effects of subcooling and two-phase inlet on flow boiling heat transfer and critical heat flux in a horizontal channel with one-sided and double-sided heating

Manipulating characteristic timescales and fiber morphology in simultaneous centrifugal spinning and photopolymerization

Development and Application of the Notched Tensile Test to UHMWPE

Experimental and computational investigation of vertical downflow condensation

Mitigation of Gear Mesh-Frequency Noise Using a Hydrostatic Bearing

Peristaltic locomotion of a modular mesh-based worm robot: precision, compliance, and friction

Microconfinement effect on gas barrier and mechanical properties of multilayer rigid/soft thermoplastic polyurethane films

Mechanically assisted crevice corrosion damage in shoulder arthroplasty is comparable to hip arthroplasty

Flow boiling and critical heat flux in horizontal channel with one-sided and double-sided heating

Mechanical Improvements to TCERA, a Tunable Compliant Energy Return Actuator

Worm-like robotic locomotion with a compliant modular mesh

Microstructure and rheology of soft to rigid shear-thickening colloidal suspensions

A biologically based neural system coordinates the joints and legs of a tetrapod

Worm-like robotic locomotion with a compliant modular mesh

Multilayer coextrusion of rubber compounds

Hip Flexion Power Assist System for Use in Hybrid Neuroprostheses

Designing responsive pattern generators: stable heteroclinic channel cycles for modeling and control

High frequency torsional-mode nanomechanical resonators enabled by very thin nanocrystalline diamond diaphragms

Optimization of melt blending process of nylon 6-POSS: improving mechanical properties of spun fibers

Feasibility of a Hydraulic Power Assist System for Use in Hybrid Neuroprostheses

Rheological behavior and structure development in Thermoplastic Polyurethanes under Uniaxial Extensional Flow

Goal-Directed CPG-Based Control for Tensegrity Spines with Many Degrees of Freedom Traversing Irregular Terrain

A low-cost robot using omni-directional vision enables insect-like behaviors

Biomechanical evaluation of a novel suturing scheme for grafting load-bearing collagen scaffolds for rotator cuff repair

Pages